VE.BUS BMS VICTRON
The VE.Bus BMS Victron is essential for protecting each cell of Victron lithium iron phosphate (LiFePO4) batteries. This advanced Battery Management System (BMS) ensures that every cell is safeguarded against overvoltage, undervoltage, and overheating, enhancing the longevity and performance of your battery setup.
- Automatically disconnects loads during imminent undervoltage conditions.
- Reduces charging current to prevent overvoltage or overheating of cells.
- Shuts down battery chargers to protect against overvoltage or overheating.
For optimal performance and safety, connect multiple BTVs in series. Explore our documentation for more information on LiFePO4 batteries. Invest in the VE.Bus BMS Victron today to ensure your battery system operates safely and efficiently!
Technical Specifications:
VE.Bus BMS
Input voltage range 9 – 70VDC
Current consumption, normal operation 10 mA (excluding load disconnect current)
Current consumption, low cell voltage 2mA
Load disconnect output
-Normally high
-Input current limit: 2A
-Dissipation current: 0A (floating output)
Charger disconnect output
-Normally high
-Input current limit: 10 mA
-Dissipation current: 0A (floating output)
Pre-alarm output
-Normally floating
-High (Vbat) in case of alarm, max. 1 A
(no short-circuit protection)
GENERAL
Communication port VE.Bus Two RJ45 connectors to connect to all VE.Bus products
Operating temperature -20 to + 50°C 0 - 120°F
Max. humidity 95% (non-condensing)
Protection type IP20
HOUSING
Material and color ABS, matte black
Weight 0.1kg
Dimensions (h x w x d) 105 x 78 x 32mm
STANDARDS
Standards: Safety EN 60950
Emissions EN 61000-6-3, EN 55014-1
Immunity EN 61000-6-2, EN 61000-6-1, EN 55014-2
Automotive Sector Regulation UN/ECE-R10 Rev. 4