GENERAL TERMS AND CONDITIONS OF SALE
www.anpertechnology.com
1. GENERAL INFORMATION
The ownership of this website, www.anpertechnology.com, (hereinafter Website) is held by: ANA ISABEL ANDÚJAR PÉREZ, hereinafter ANPER TECHNOLOGY, with NIF: 77487886N.
Address: AVENIDA DEL TEATRO, 55, 04007, ALMERÍA
This document (as well as all other documents mentioned herein) regulates the conditions governing the use of this Website (www.anpertechnology.com) and the purchase or acquisition of products and/or services on it (hereinafter, Conditions).
For the purposes of these Conditions, it is understood that the activity developed by ANPER TECHNOLOGY through the Website includes:
Electronics products store
In addition to reading these Conditions, before accessing, browsing and/or using this website, the User must have read the Legal Notice and General Conditions of Use, including the cookie policy, and the privacy and data protection policy of ANPER TECHNOLOGY. By using this Website or by making and/or requesting the acquisition of a product and/or service through it, the User consents to be bound by these Conditions and by everything mentioned above, so if you do not agree with all of it, you must not use this Website.
Likewise, it is informed that these Conditions could be modified. The User is responsible for consulting them each time they access, browse and/or use the Website as those in force at the time the acquisition of products and/or services is requested will be applicable.
For all questions that the User may have in relation to the Conditions, they can contact the owner using the contact details provided above or, where appropriate, using the contact form.
2. THE USER
Access, navigation, and use of the Website confers the status of user (hereinafter referred to, indistinctly, individually as User or jointly as Users), and therefore, from the moment navigation begins on the Website, all the Conditions established here are accepted, as well as their subsequent modifications, without prejudice to the application of the corresponding mandatory legal regulations as the case may be.
The User assumes responsibility for correct use of the Website. This responsibility shall extend to:
• Use this Website only to make legally valid inquiries and purchases or acquisitions.
• Do not make any false or fraudulent purchases. If it could reasonably be considered that a purchase of this nature has been made, it could be cancelled and the relevant authorities informed.
• Provide truthful and lawful contact details, for example, email address, postal address and/or other data (see Legal Notice and General Conditions of Use).
The User declares to be over 18 years of age and have the legal capacity to enter into contracts through this Website.
The Website is mainly directed at Users residing in Spain. ANPER TECHNOLOGY does not ensure that the Website complies with the laws of other countries, either totally or partially. ANPER TECHNOLOGY declines all responsibility that may derive from such access, nor does it guarantee shipments or provision of services outside of Spain.
The User may formalize, at their choice, with ANPER TECHNOLOGY the contract for the sale of the desired products and/or services in any of the languages in which these Conditions are available on this Website.
3. PURCHASE OR ACQUISITION PROCESS
Duly registered Users can buy on the Website by the established means and forms. They must follow the online purchase and/or acquisition procedure of www.anpertechnology.com, during which several products and/or services can be selected and added to the cart, basket or final purchase space and, finally, click on "Place order with payment obligation".
Likewise, the User must fill in and/or check the information requested at each step, although, during the purchase process, before making the payment, the purchase data can be modified.
Next, the User will receive an email confirming that ANPER TECHNOLOGY has received their order or purchase request and/or service provision, i.e., the order confirmation. And, where appropriate, they will also be informed by email when their purchase is being sent. If applicable, this information could also be made available to the User through their personal connection space on the Website.
In the purchase procedure, the User can select whether they wish to receive their invoice in electronic or paper format without having to pay any financial amount. If electronic invoice is selected, it will be sent to the User via email and, if applicable, through their personal connection space on the Website. The User can at any time revoke the consent to receive the electronic invoice by requesting it through our email info@anpertechnology.com or our telephone: +34 636 35 67 49.
The User acknowledges being aware, at the time of purchase, of certain particular conditions of sale concerning the product and/or service in question and which are shown next to the presentation or, where appropriate, image of it on its page of the Website, indicating, by way of illustration but not limitation, and according to each case: name, price, components, weight, quantity, color, details of the products, or characteristics, way in which they will be carried out and/or cost of the benefits; and acknowledges that the completion of the purchase or acquisition order materializes the full and complete acceptance of the particular conditions of sale applicable to each case.
The communications, purchase orders and payments that intervene during the transactions carried out on the Website could be archived and kept in the computerized records of ANPER TECHNOLOGY in order to constitute a means of proof of the transactions, in any case, respecting reasonable security conditions and the laws and regulations in force that are applicable in this regard, and particularly attending to the LOPDP and DD and the rights that assist Users according to the privacy policy of this Website (Privacy and Data Protection Policy).
4. AVAILABILITY
All purchase orders received by ANPER TECHNOLOGY through the Website are subject to the availability of the products and/or to the fact that no circumstance or cause of force majeure (clause nine of these Conditions) affects the supply thereof and/or the provision of the services. If difficulties occur in terms of product supply or if there are no products in stock, ANPER TECHNOLOGY undertakes to contact the User and refund any amount that might have been paid as an amount. This will be equally applicable in cases where the provision of a service becomes unfeasible.
5. PRICE AND PAYMENT
The prices displayed on the Website are the final ones, in Euros (€) and include taxes, unless by legal requirement, especially regarding VAT, a different matter is indicated and applied.
However, and unless otherwise indicated, the prices of the items offered exclude shipping costs that may be incurred, which will be added to the total amount due at the time of managing the shipping procedure by the User, where they will consult the shipping methods and costs available and freely choose the one that suits them best.
In no case will the Website automatically add additional costs to the price of a product or service, but only those that the User has voluntarily and freely selected and chosen.
Prices may change at any time, but possible changes will not affect orders or purchases for which the User has already received an order confirmation.
Accepted payment methods will be:
- BANK TRANSFER: You must indicate the web order number in the concept of the transfer. This method is slower as it depends on your bank or the country where you live, and it could take up to 15 days. Once we receive the payment in our bank account, the order will leave the warehouse.
- CREDIT OR DEBIT CARD (Redsys Gateway): As an electronic payment method, the transaction is carried out instantly. This guarantees the speed of processing your order and speeds up the shipping times of your order. Likewise, refunds or returns are just as fast with this method in case you wish to exchange or return an item.
Your credit card can be rejected for one of the following reasons:- The card may be expired. Check that your card does not exceed the validity date.
- The card limit may have been reached. Check with your bank that the card has not exceeded the amount allowed to make purchases.
- Some entered data may be incorrect. Check that you have correctly filled in all the necessary fields.
- You might not have the online shopping function activated.
- PAYPAL AND 3-INSTALLMENT PAYMENT: Secure payment through the PayPal platform. It also allows the "Pay in 3" option, which divides your purchase into three interest-free installments (service subject to PayPal's approval and conditions).
Credit cards will be subject to checks and authorizations by the issuing bank entity; if said entity does not authorize the payment, ANPER TECHNOLOGY will not be responsible for any delay or non-delivery and will not be able to formalize any contract with the User.
In any case, by clicking on Place order with payment obligation, the User confirms that the payment method used is theirs or that, where appropriate, they are the legitimate possessor of the gift card or credit card.
6. DELIVERY
In cases where it is appropriate to perform the physical delivery of the contracted good, deliveries will be made in the following territory: Spain (Mainland and Balearic Islands), Portugal and the rest of Europe (Eurozone). Shipments are not made to the Canary Islands, Ceuta or Melilla.
SHIPPING COSTS
The prices indicated below include VAT.
| Shipping Zone | Order Amount | Shipping Cost |
|---|---|---|
| Mainland Spain and Portugal | Over 100 € | FREE |
| Less than or equal to 100 € | 6,90 € | |
| Balearic Islands | Over 200 € | FREE |
| Less than or equal to 200 € | 14,99 € | |
| Rest of Europe | Over 200 € | FREE |
| Less than or equal to 200 € | 14,90 € |
DELIVERY TIMES
Orders are prepared at the moment the payment has been confirmed and at the following schedule: Monday to Friday from 9:00 to 17:00 h. Orders placed outside these hours will be prepared on the next working day. Shipments are not made on Saturdays, Sundays or holidays.
Items purchased in our online store are sent by courier or postal mail with an estimated timeframe of:
- Mainland Spain and Portugal: 48 to 72 hours.
- Balearic Islands: 72 hours.
- European Union: 10-15 days.
Except for those cases in which there are unforeseen or extraordinary circumstances or, where appropriate, derived from the customization of products, the purchase order consisting of the products listed in each purchase confirmation will be delivered within the period indicated on the Website according to the shipping method selected by the User and, in any case, within a maximum period of 30 calendar days from the date of order confirmation.
If for some reason attributable to it, ANPER TECHNOLOGY could not meet the delivery date, it will contact the User to inform them of this circumstance and they may choose to go ahead with the purchase establishing a new delivery date or cancel the order with a full refund of the price paid. In any case, home deliveries are made on working days.
If it is impossible to deliver the order due to the User's absence, the order could be returned to the warehouse. However, the carrier would leave a notice explaining where the order is and how to have it delivered again.
If the User is not going to be at the delivery location in the agreed time slot, they must contact ANPER TECHNOLOGY to arrange delivery another day.
In the event that 30 days elapse since your order is available for delivery and it has not been delivered for causes not attributable to ANPER TECHNOLOGY, ANPER TECHNOLOGY will understand that the User wishes to withdraw from the contract and it will be considered resolved. As a consequence of the resolution of the contract, all payments received from the User will be returned, except for the additional costs resulting from the User's own choice of a delivery method other than the least expensive ordinary delivery method offered by the Website, without any undue delay and, in any case, within a maximum period of 14 days from the date on which the contract is considered resolved.
However, the User must keep in mind that the transport derived from the resolution may have an additional cost that may be passed on to them.
For the purposes of these Conditions, it will be understood that the delivery has occurred or that the order has been delivered at the moment when the User or a third party indicated by the User acquires physical possession of the products, which will be evidenced by signing the receipt of the order at the agreed delivery address.
The risks that may derive from the products will be borne by the User from the moment of delivery. The User acquires ownership of the products when ANPER TECHNOLOGY receives full payment of all amounts due in relation to the purchase or acquisition made, including shipping costs, or at the time of delivery, if it takes place at a time after the complete receipt of the amount subject to payment by ANPER TECHNOLOGY.
In accordance with the provisions of Law 37/1992, of December 28, on Value Added Tax (VAT), purchase orders for delivery and/or provision will be understood to be located in the territory of application of Spanish VAT if the delivery address is in Spanish territory except for the Canary Islands, Ceuta and Melilla. The applicable VAT rate will be the one legally in force at any time depending on the specific item in question.
7. TECHNICAL MEANS TO CORRECT ERRORS
The User is informed that in case they detect an error has occurred when entering data necessary to process their purchase request on the Website, they may modify them by contacting ANPER TECHNOLOGY through the contact spaces enabled on the Website, and, where appropriate, through those enabled to contact customer service, and/or using the contact details provided in the first clause (General Information). Likewise, this information could also be corrected by the User through their personal connection space on the Website.
In any case, the User, before clicking on Place order with payment obligation, has access to the space, cart, or basket where their purchase requests are recorded and can make modifications.
Similarly, the User is referred to consult the Privacy and Data Protection Policy for more information on how to exercise their right of rectification as established in Organic Law 3/2018, of December 5, on the Protection of Personal Data and guarantee of digital rights.
8. RETURNS
In cases where the User acquires products on or through the owner's Website, they are assisted by a series of rights, as listed and described below:
Right of Withdrawal
The User, as a consumer and user, makes a purchase on the Website and therefore has the right to withdraw from said purchase within a period of 14 calendar days without need for justification.
This withdrawal period will expire 14 calendar days from the day that the User or a third party authorized by them, other than the carrier, acquired physical possession of the goods purchased on the ANPER TECHNOLOGY Website or in case the goods composing your order are delivered separately, 14 calendar days from the day that the User or a third party authorized by them, other than the carrier, acquired physical possession of the last of those goods composing the same purchase order.
To exercise this right of withdrawal, the User must notify ANPER TECHNOLOGY of their decision.
The User, regardless of the medium they choose to communicate their decision, must express clearly and unequivocally their intention to withdraw from the purchase contract. In any case, the User may use the model withdrawal form that ANPER TECHNOLOGY makes available as an annexed part of these Conditions; however, its use is not mandatory.
To comply with the withdrawal period, it is sufficient that the communication expressing the decision to withdraw is sent before the corresponding period expires.
In case of withdrawal, ANPER TECHNOLOGY will refund the User all payments received, including shipping costs (with the exception of additional costs chosen by the User for a shipping method other than the least expensive method offered on the Website) without undue delay and, in any case, no later than 14 calendar days from the date on which ANPER TECHNOLOGY is informed of the User's decision to withdraw.
ANPER TECHNOLOGY will refund the User using the same payment method used for the initial purchase transaction. This refund will not generate any additional cost to the User. However, ANPER TECHNOLOGY could withhold said refund until having received the products or items from the purchase, or until the User presents proof of their return, whichever condition is met first.
The User can return or send the products to ANPER TECHNOLOGY at:
ANPER TECHNOLOGY
AVENIDA DEL TEATRO, 55, 04007, ALMERÍA
Phone: +34 636 35 67 49
Email: info@anpertechnology.com
And must do so without any undue delay and, in any case, no later than within 14 calendar days from the date on which ANPER TECHNOLOGY was informed of the withdrawal decision.
The User acknowledges that they must bear the direct cost of returning (transport, delivery) the goods, if any were incurred. In addition, they will be responsible for the decrease in value of the products resulting from handling other than that necessary to establish the nature, characteristics and functioning of the goods.
The User acknowledges knowing that there are exceptions to the right of withdrawal, as stated in article 103 of Royal Legislative Decree 1/2007, of November 16, which approves the consolidated text of the General Law for the Defense of Consumers and Users and other complementary laws. By way of example, and not exhaustive, this would be the case of: personalized products; products that can deteriorate or expire quickly; music or video CDs/DVDs without their wrapping as sealed in the factory; products that for reasons of hygiene or health are sealed and have been unsealed after delivery.
In this same sense, the provision of a service that the User could contract on this Website is governed, as this same Law establishes that the Right of withdrawal will not assist Users when the provision of the service has been completely executed, or when it has begun, with the express consent of the consumer and user and with the recognition on their part that they are aware that once the contract has been completely executed by ANPER TECHNOLOGY, they will have lost their right of withdrawal.
In any case, no refund will be made if the product has been used beyond the mere opening of it, of products that are not in the same conditions in which they were delivered or that have suffered some damage after delivery.
Likewise, the products, instructions and other documents accompanying them, if any, plus a copy of the purchase invoice must be returned.
IMPORTANT: During the validity of the State of Alarm or its possible extensions, the deadlines for the return of products purchased by any modality, whether in person or online, are interrupted. The calculation of the deadlines will resume at the moment the Royal Decree 463/2020, of March 14, declaring the State of Alarm or, where appropriate, the extensions thereof, loses its validity.
Return of defective products or error in shipment
These are all those cases in which the User considers that, at the time of delivery, the product does not conform to what was stipulated in the contract or purchase order, and therefore, must contact ANPER TECHNOLOGY immediately and let them know the existing non-conformity (defect/error) by the same means or using the contact details provided in the previous section (Right of Withdrawal).
The User will then be informed on how to proceed with the return of the products, and these, once returned, will be examined and the User will be informed, within a reasonable time, if a refund or, where appropriate, replacement is appropriate.
The refund or replacement of the product will be made as soon as possible and, in any case, within 14 days following the date on which we send an email confirming that the refund or replacement of the non-conforming item is appropriate.
The amount paid for those products that are returned due to a defect, when it actually exists, will be fully refunded, including delivery costs and the costs incurred by the User to make the return. The refund will be made by the same payment method that the User used to pay for the purchase.
In any case, the rights recognized in the legislation in force at any time for the User, as a consumer and user, will always apply.
Warranties
The User, as a consumer and user, enjoys warranties on the products that can be acquired through this Website, in the terms legally established for each type of product, ANPER TECHNOLOGY responding, therefore, for the lack of conformity thereof that manifests itself within a period of three years from the delivery of the product.
In this sense, it is understood that products are in conformity with the contract provided that: they adjust to the description made by ANPER TECHNOLOGY and possess the qualities presented in it; they are suitable for the uses to which products of the same type are ordinarily intended; and they present the usual quality and benefits of a product of the same type and that are fundamentally expected from it. When this is not the case regarding the products delivered to the User, the latter must proceed as indicated in the section Return of defective products or error in shipment. However, some of the products marketed on the Website could present non-homogeneous characteristics provided that these derive from the type of material with which they have been manufactured, and therefore will be part of the individual appearance of the product and will not be a defect.
On the other hand, it could happen that the User acquires on the Website a product of a brand or manufactured by a third party. In this case, and the User considering that it is a defective product, they also have the possibility of contacting the brand or manufacturer responsible for the product to find out how to exercise their legal warranty right directly against them during the three years following the delivery of said products. For this, the User must have kept all the information regarding the product warranty.
9. AFTER-SALES SERVICE
ANPER TECHNOLOGY has an after-sales service; while the warranty is in force, the customer may execute it by going to the ANPER TECHNOLOGY establishment, to the after-sales service. In addition, you can contact our after-sales service in case of doubts about your items, inquiries, advice or any problem with the products or in the delivery process. It offers the fastest and most efficient attention to our customers.
To contact our after-sales service, you can use any of the following means, indicating your invoice number or order number and date:
Postal address: ANPER TECHNOLOGY AVENIDA DEL TEATRO, 55, 04007, ALMERÍA
Phone: +34 636 35 67 49
Email: info@anpertechnology.com
10. EXEMPTION FROM LIABILITY
Unless legally provided to the contrary, ANPER TECHNOLOGY will not accept any responsibility for the following losses, regardless of their origin:
• Any losses that were not attributable to any breach on its part,
• Business losses (including loss of profits, income, contracts, expected savings, data, loss of goodwill or unnecessary expenses incurred), or any other indirect loss that was not reasonably foreseeable by both parties at the time the purchase contract for the products was formalized between both parties.
Likewise, ANPER TECHNOLOGY also limits its responsibility regarding the following cases:
• ANPER TECHNOLOGY applies all measures concerning providing a faithful visualization of the product on the Website; however, it is not responsible for the minor differences or inaccuracies that may exist due to lack of screen resolution, or problems of the browser used or others of this nature.
• ANPER TECHNOLOGY will act with maximum diligence to make the product subject of the purchase order available to the company in charge of transport. However, it is not responsible for damages resulting from a malfunction of the transport, especially due to causes such as strikes, road detentions, and in general any others characteristic of the sector, which lead to delays, losses or theft of the product.
• Technical failures that due to accidental or other causes prevent a normal operation of the service through the internet. Lack of availability of the Website for maintenance reasons or others, which prevents having the service available. ANPER TECHNOLOGY puts all means at its disposal to carry out the process of purchase, payment and shipping/delivery of products; however, it is exempt from responsibility for causes not attributable to it, case of force majeure or acts of God.
• ANPER TECHNOLOGY will not be responsible for the misuse and/or wear and tear of the products that have been used by the User. At the same time, ANPER TECHNOLOGY will also not be responsible for an erroneous return made by the User. It is the User's responsibility to return the correct product.
• In general, ANPER TECHNOLOGY will not be responsible for any breach or delay in the fulfillment of any of the assumed obligations, when it is due to events that are beyond our reasonable control, i.e., due to force majeure, and this may include, by way of illustration but not limitation:
• Strikes, lockouts or other protest measures.
• Civil commotion, riot, invasion, terrorist threat or attack, war (declared or not) or threat or preparations for war.
• Fire, explosion, storm, flood, earthquake, sinking, epidemic or any other natural disaster.
• Impossibility of use of trains, ships, airplanes, motor transports or other means of transport, public or private.
• Impossibility of using public or private telecommunications systems.
• Acts, decrees, legislation, regulations or restrictions of any government or public authority.
In this way, the obligations will be suspended during the period in which the cause of force majeure continues, and ANPER TECHNOLOGY will have an extension in the period to fulfill them for a period of time equal to the duration of the cause of force majeure. ANPER TECHNOLOGY will use all reasonable means to find a solution that allows us to fulfill our obligations despite the cause of force majeure.
11. WRITTEN COMMUNICATIONS AND NOTIFICATIONS
By using this Website, the User accepts that most communications with ANPER TECHNOLOGY will be electronic (email or notices published on the Website).
For contractual purposes, the User consents to use this electronic means of communication and recognizes that every contract, notification, information and other communications that ANPER TECHNOLOGY sends electronically comply with the legal requirements of being in writing. This condition will not affect the rights recognized by law to the User.
The User can send notifications and/or communicate with ANPER TECHNOLOGY through the contact details provided in these Conditions and, where appropriate, through the contact spaces on the Website.
Likewise, unless otherwise stipulated, ANPER TECHNOLOGY can contact and/or notify the User at their email or at the postal address provided.
12. WAIVER
No waiver by ANPER TECHNOLOGY of a specific right or legal action or lack of requirement by ANPER TECHNOLOGY for strict compliance by the User with any of their obligations shall imply either a waiver of other rights or actions derived from a contract or from the Conditions, nor shall it exonerate the User from compliance with their obligations.
No waiver by ANPER TECHNOLOGY of any of these Conditions or of the rights or actions derived from a contract shall take effect unless it is expressly established that it is a waiver and it is formalized and communicated to the User in writing.
13. NULLITY
If any of these Conditions were declared null and void by a firm resolution issued by a competent authority, the rest of the clauses will remain in force, without being affected by said declaration of nullity.
14. ENTIRE AGREEMENT
These Conditions and any document to which express reference is made in them constitute the entire agreement existing between the User and ANPER TECHNOLOGY in relation to the object of purchase and sale and replace any other pact, agreement or previous promise agreed verbally or in writing by the same parties.
The User and ANPER TECHNOLOGY acknowledge having consented to the celebration of a contract without having relied on any declaration or promise made by the other party, except for what appears expressly mentioned in these Conditions.
15. DATA PROTECTION
The information or data of a personal nature that the User facilitates to ANPER TECHNOLOGY in the course of a transaction on the Website will be treated in accordance with what is established in the data protection policies (Privacy and Data Protection Policy). By accessing, browsing and/or using the Website, the User consents to the processing of said information and data and declares that all information or data they provide are truthful.
16. SECURITY AND PROTECTION FOR BUYERS
Payments for purchases at ANA ISABEL ANDÚJAR PÉREZ are made through the official Redsys payment channel provided by Cajamar, with the 3DSecure system, using encryption systems and data transfer security through the SSL protocol, so the buyer will enjoy the protection of these channels at all times.
www.anpertechnology.com does not have access to your credit card data at any time, nor does it store it.
These are purchases made in Spain.
17. APPLICABLE LEGISLATION AND JURISDICTION
Access, navigation and/or use of this Website and product purchase contracts through it will be governed by Spanish legislation.
Any controversy, problem or disagreement arising from or related to access, navigation and/or use of the Website, or with the interpretation and execution of these Conditions, or with the sales contracts between ANPER TECHNOLOGY and the User, will be submitted to the non-exclusive jurisdiction of the Spanish courts and tribunals.
18. COMPLAINTS AND CLAIMS
The User can send to ANPER TECHNOLOGY their complaints, claims or any other comment they wish to make through the contact details provided at the beginning of these Conditions (General Information).
In addition, ANPER TECHNOLOGY has official complaint forms available to consumers and users, which they can request from ANPER TECHNOLOGY at any time, using the contact details provided at the beginning of these Conditions (General Information).
Likewise, if from the celebration of this purchase contract between ANPER TECHNOLOGY and the User a controversy emanates, the User as a consumer can request an extrajudicial solution of controversies, in accordance with Regulation EU No. 524/2013 of the European Parliament and of the Council, of May 21, 2013, on online dispute resolution in consumer matters and amending Regulation (EC) No. 2006/2004 and Directive 2009/22/EC. You can access this method through the website: http://ec.europa.eu/consumers/odr/.
Last modification of these General Conditions of Sale: 03.03.2026
ANNEX
Information regarding the exercise of the right of withdrawal
A. Information to the consumer and user about withdrawal
Right of withdrawal:
You have the right to withdraw from this contract within a period of 14 calendar days without need for justification.
The withdrawal period will expire 14 calendar days from the day that you or a third party indicated by you, other than the carrier, acquired physical possession of the last of those goods.
To exercise the right of withdrawal, you must notify us at:
ANPER TECHNOLOGY
AVENIDA DEL TEATRO, 55, 04007, ALMERÍA
+34 636 35 67 49
info@anpertechnology.com
of your decision to withdraw from the contract through an unequivocal statement (for example, a letter sent by post, fax or email). You may use the model withdrawal form below, although its use is not mandatory.
To comply with the withdrawal period, it is sufficient that the communication relating to the exercise by you of this right is sent before the corresponding period expires.
Consequences of withdrawal:
In case of withdrawal on your part, we will return to you all payments received from you, including delivery costs (with the exception of additional costs resulting from the choice on your part of a delivery method other than the least expensive ordinary delivery method we offer) without any undue delay and, in any case, no later than 14 calendar days from the date on which we are informed of your decision to withdraw from this contract. We will proceed to make said refund using the same payment method used by you for the initial transaction, unless you have expressly provided otherwise; in any case, you will not incur any expense as a result of the refund.
We may withhold the refund until we have received the goods, or until you have presented proof of their return, whichever condition is met first.
You must return the goods to us or deliver them directly to…
ANPER TECHNOLOGY
AVENIDA DEL TEATRO, 55, 04007, ALMERÍA
+34 636 35 67 49
info@anpertechnology.com
without any undue delay and, in any case, no later than within a period of 14 calendar days from the date on which you communicate your decision to withdraw from the contract. The deadline will be considered met if you return the goods before said period has concluded. You must bear the direct cost of returning the goods.
You will only be responsible for the decrease in value of the goods resulting from handling other than that necessary to establish the nature, characteristics and functioning of the goods.
B. Model withdrawal form
(you should only complete and send this form if you wish to withdraw from the contract)
For the attention of:
ANPER TECHNOLOGY
AVENIDA DEL TEATRO, 55, 04007, ALMERÍA
info@anpertechnology.com
I/We (*) hereby notify you that I/we (*) withdraw from my/our (*) contract for the sale of the following good/provision of the following service (*)
Name of the good/service (*): ______________________________________________
Ordered on (*): __ / __ / ____
Received on (*):__ / __ / ____
Name: ______________________________________________________________(name of the consumer and user or consumers and users).
Address: _____________________________________________________________(address of the consumer and user or consumers and users).
Signature: (only if this form is presented on paper).
Date: __ / __ / ____