A-NBF-3-BAS NMEA BUFFER 1-6
The A-NBF-3-BAS NMEA BUFFER 1-6 is designed to isolate and store NMEA 0183 data, enabling seamless connectivity for multiple devices. This powerful buffer can distribute up to six identical amplified data streams from a single source, ensuring that every listener receives data at the required voltage levels for consistent data quality.
- Isolates inputs and outputs to protect both the source device and listening devices.
- Features ISO-Drive™ technology on outputs and OPTO isolation on inputs for safe connections.
- Includes power distribution for NMEA Talker, simplifying installation by reducing wiring requirements.
- Ensures reliable data transmission with buffered signals for optimal performance.
Upgrade your NMEA network with the A-NBF-3-BAS today and experience enhanced data management.
Technical Specifications:
Power Supply
- Input power supply voltage: 10 to 35 V DC
- Input power supply current (NBF-3 only): 100 mA max at 12 V DC (all outputs at full power with 100 Ω loads)
- Input power supply connector: 2-way pluggable screw terminal, 3.5 mm pitch
- Input protection (NBF-3 only): Continuous protection against reverse polarity and ESD
- Power indicator: LED, blue (constant on indicates correct operation when input power is connected)
- Output voltage of the listener power supply: 10 to 35 V DC derived directly from the input power supply voltage
- Output current of the listener: 500mA max @ <= 30°C (see note)* (self-resetting PTC fuse)
- Receiver power output connector: 2-way pluggable screw terminal, 3.5 mm pitch
- Number of input/listening ports: One isolated NMEA 0183 receiver
- Number of Output / Converter Ports: Six isolated NMEA 0183 converters
- Compatibility: Fully compatible with NMEA 0183, RS422, and RS232. Compatible with RS485 Listener
- Galvanic isolation of NMEA 0183 transmitter and receiver
- Speed / Baud rate 4800 to 115200 bps
- Transmitter output voltage >= 2.1V (differential) at 100Ω
- Transmitter output current 20mA max.
- Transmitter output protection: Short circuit and ESD
- Receiver input voltage tolerance -15V to +15V DC, -35V to +35V short term (<1 second)
- Receiver input protection: Current limiting, overload protection at 40 V DC and ESD protection
- Listening data indicator LED, green (flashes according to data transmission speed)
- Connectors: 2-way pluggable screw terminals, 3.5 mm pitch.
Isolator
- NMEA 0183 Receiver: OPTO-Isolated
- NMEA 0183 Transmitter: uses IsoDriveTM
Mechanical
- Housing material: Polycarbonate
- Protective cover material: Polycarbonate
- Sealing materials: Expanded silicone foam gasket, closed-cell polyurethane splash guard, and waterproof ePTFE vent
- Dimensions: 127 mm (length) x 106 mm (width) x 48 mm (height)
- Weight: 210 g
- Mounting: 4 x 3.5 mm tabs allow panel mounting with self-tapping screws (included), optional DIN rail mounting available upon request.
- EMC EN 60945 (sections 9 and 10)
- Environmental
- Protection: IP65
- Operating temperature: -25°C to +70°C
- Storage temperature: -40°C to +85°C
- Maximum humidity: 93% at +40°C
- Warranty: 3 years (5 years if registered)